digital Aircraft cable tension meter digital Aircraft cable tensiometer
It is necessary to adjust the tension when the aircraft control cable is installed, and the proper tension can achieve the best control effect. To adjust the tension of the aircraft cable, a digital aircraft cable tension meter or a digital aircraft cable tensiometer is needed. The digital aircraft cable tension meter provided by Shenyang Betten Technology Co., Ltd. The digital aircraft cable tension meter NTA series can measure the tension of a variety of wire diameter specifications with a measurement accuracy of 2% of full scale. With separate data memory function, it can record 10 tension values continuously. Continuous data analysis can also be performed, and the maximum value, minimum value, and draw value of tension value can be calculated over a period of time. The NTAX series can also be connected to a computer via wired and wireless methods to record measurement data.
NTA series Special purpose digital handheld tension meter can measure 0-5.5mm diameter steel rope tension, suitable for aircraft manufacturing industries.
The NTA series has 6 kinds of tension ranging from 1.0-10.0cdaN to 10.0-100.0daN. The width of the measuring head varies with different ranges.
100MM wide measuring head 140mm wide measuring head
1. The patented technology automatically resets the meter to zero , which improves the measurement accuracy and facilitates measurement.
2. Equipped with a line catching motion structure and labor-saving lever, it is easy to capture the measured material.
3. Rugged, non-slip aluminum case, resistant to electrical interference.
4. LIPO lithium-ion polymer battery (about 60 hours of continuous operation).
5. The tested material, the guide roller, and the screen are located on the same plane. During the test, the test data, the status of the guide roller and the tested material can be seen.
6. A maximum of 10 materials can be accurately calibrated. With the wire diameter compensator, the tested wire diameter range is larger.
7. character menu setting interface, easy to operate.
8． According to different ranges and needs, the measurement value display unit can be selected g, kg, c N, N, daN, lb
9. It can record the maximum value, minimum value, peak value and average value in the measurement process, and can also store 10 independent measurement values.
10. Programmable setting of the maximum and minimum value of the trend status bar, clearly determine the range of tension change, and have the advantages of mechanical instrument trend display.
11. Provides fine adjustment of display results. If There is a slight deviation between the material measured on site and the standard calibration material, and accurate values can be displayed without recalibration.
12. Function settings can be protected by passwords to improve setting security.
13. Betten tensiometer provides two display modes, taking into account the advantages of accurate electronic tensiometer reading and mechanical tensiometer trend display.
Measuring head width
Unit conversion: 1daN = 10N = 1.02kg 1cN = 1.02g
special lever (Order code F Example: NTA-10K-F, standard for NT-20K to NT-100k,recommended for NT-10K)
NTA shipment includes tension meter, portable meter box, charger, manual, certificate of compliance.
Accuracy : (factory calibration material) 2% full scale (FS), (other materials) 3% FS.
Display update frequency : 0.5 seconds
Optional units: gf, cN, N, kgf, daN, LB (switchable units are different for different ranges)
Adjustable range: The displayed value can be adjusted within ± 10 steps of 1% of full scale according to the site requirements
Line speed: 1000m / min
Stored value: Maximum, minimum, maximum peak, minimum peak, average
Display : Dot-matrix LCD
Shell size: 76 × 46 × 275mm
Power : Lithium-ion rechargeable battery, continuous working for about 60 hours
Operating temperature : 10-45 ° C, 90% relative humidity or less
Accessories : Instrument, instruction manual, certificate, charger, instrument box
Scope of application Tension meas
Sorted by industry
Contact: China tension meter manufacturer BETTEN Technology
Add: Shenyang Shenbei International Science and Technology Cooperation Industrial Park